Sanforth-des

Composition:

Glutaraldehyde - 174 g / l;

Dydecyldimethylammonium chloride is 64 g / l.

Formaldehyde - 172 g / l

Benefits:

Concentrated, highly active disinfectant;

For any kind of surfaces;

Highly effective even in hard water;

Has bactericidal, virucidal, fungicidal activity;

Virucidal action at 1%: economically viable;

Does not cause habitability in microorganisms.

Using:

Applies to farms for the breeding of any animal species:

Refueling of disinfectants and disinfectants;

Disinfection of surfaces is carried out only in the absence of animals (animals should be avoided);

Wet disinfection of surfaces, after their cleaning: walls, ceiling, floor, equipment, inventory, etc .;

Disinfection of drinking lines;

Aerosol treatment, both cold and hot mist;

Disinfection of transport intended for transportation of animals, forages, meat, etc .;

For the treatment of incubation equipment and hatching eggs.

Instruction for use:

Work solutions are prepared by adding appropriate volumes of the drug to tap water.

Disinfection is carried out by methods: wiping, spraying and aerosol spraying;

For refueling of disinfectants and disinfectants use 0,5-1% rr;

For preventive wet processing, use a 0.5% solution, at a rate of 0.25-0.3 l / m2 surface. Exposition of 30-60 minutes.

For forced and final disinfection, use 0.5-1% rr, at a rate of 0.3-0.4 l / m2 surface. Exposition is 2 hours.

For disinfection, with viral and fungal diseases, the preparation is used in the form of 1.25-2.25% p-ra, at the rate of 0.3-0.5 l / m2 surface. Exposition 3 hours.

For disinfection of premises with infectious diseases caused by spore-forming microorganisms of the genus Bacillus, a 3% solution is used, at a rate of 1l / m2 of the treated surface. Exposition 3 hours.

Aerosol disinfection is carried out by 10-15% aqueous solution, at a rate of 1-1.5 ml / m3 of room volume. Exposition - 6 hours. The temperature in the room should be at least 15 degrees Celsius, and humidity not lower than 60%. At lower humidity, water should be sprayed without the preparation before the treatment, at a rate of 10 ml / m3.

To process the incubation equipment, 0.5% of Sanfort-des are used. Exposition - 30-60 minutes;

Disinfection of transport is carried out by 0.5-1% of the company, at the rate of 0.3 l / m2 surface. Exposition is 20 minutes.

Disinfection of the premises of walking yards and paved areas is carried out by irrigation with a 2% aqueous solution, at a rate of 0.5 l / m2. Exposition is 2 hours.